 |
STUD DRIVERS & REMOVERS |
|
|
|
|
The
ROLL GRIP®
uses a series of
hardened and ground steel rolls to grip the outside diameter of a stud.
Once engaged on a stud, power can be applied to rotate the stud in either
direction. The
ROLL GRIP®
is one of the most versatile stud driver/removers available at any price.
The complete
Roll Grip catalog is now available online.
|
|
|
299kb pdf |
|
| The MODEL R® is similar in design to the ROLL GRIP® but the MODEL R® has been specifically designed to drive/remove pipes, pipe nipples, and hollow studs.
|
|
|
RD® |
353kb pdf |
| The RD® is a more sophisticated version of our basic ROLL GRIP®. Designed as a drive only tool the RD® incorporates a self centering core and a stud retention device that makes it much easier to use and drastically increases productivity on the assembly line.
|
|
|
RCD® |
353kb pdf |
| The RCD® is an RD® that has been fitted with a rolling element clutch. The addition of the clutch enables the operator to quickly and easily adjust the driving torque of the fastener.
|
|
|
207kb pdf |
|
|
Automatically
removes threaded studs instantly without thread damage. When the
victory®
stud remover is pushed onto the stud the jaws engage the threads of the
stud. When reversal torque is applied, a special cam mechanism locks
the
victory® onto the stud. Once the stud has been removed the stud can be easily
pulled from the
victory®. The Victory® can also be used to check back-out torque.
|
|
|
316kb pdf |
|
| Manually removes threaded studs without damaging the threads. The extracto® is the perfect tool for low volume applications that require the reuse of extracted studs.
|
|
|
|
|
|
||
|
|
|
|
| Revised: 04/29/04 |
|
