 |
® |
| Lancer-1 | Lancer-2 | ||
 |
 |
||
| With Centering Guide |
With #10-AL Auto-Load Gage |
With Posi-Load Stud Retainer |
With ML "Machine Load" Stud Retainer |
|
The Titan
Lancer®
Series® |
|||
|
|
|||
| Cartridge Design
for Easy Maintenance The TITAN LANCER incorporates a unique cartridge design. By simply unscrewing the LANCER's Assembly Cap, all internal parts may be literally poured out onto the workbench. This eliminates time consuming and costly repairs, as well as the need to keep expensive quantities of replacement tools on hand. All parts are made of special alloy steel, heat treated to optimum levels and are independently replaceable. |
|||
|
Power Source With the exception of impact and impulse drive tools, all other power tools are acceptable as long as you stay within the recommended RPM range and torque limits listed here: |
|||
|
|
RPM AND TORQUE CHART |
||
| Lancer-1 | Lancer-2 | ||
|
MAXIMUM TORQUE LIMIT |
|||
|
12 Foot lbs. 16.32 NM 1.7 KgM |
35 Foot lbs. 47 NM 4.8 KgM |
||
| RPM | |||
| MIN / MAX | MIN /MAX | ||
| 500 / 1500 | 300 / 1000 | ||
|
Projection Height Applications If the stud is not driven to the bottom of the tapped hole, and threads are still visible above the surface of the workpiece, you are working with a projection height application. Please see pages 4 & 6 for further details. |
(Stud shown completely driven to required height.) |
||
|
|
|||
|
Torque Applications If the stud is driven to the bottom of the hole or until the shoulder is flush with the workpiece, you are working with a torque application. Please see page 5 for further details. |
(Stud shown completely driven to torque.) |
||
|
|
|||
|
Page 1 of 11 |
 |
|||||
|
Click Here To Submit Your Application And Receive A Prompt Quote |
||||||
| RETURN TO TOP OF PAGE | RETURN TO HOME PAGE | CONTACT TITAN TOOL COMPANY | ||||
| Revised: 09/19/03 | ||||||