X-SERIES

The TITANMATE┬« X-SERIES are designed with the same components of the TMAR2 and TMAR4 series arms. The X-SERIES dual parallel arm design allows for additional reach. The TMAR2-X55 allows for a 10lb. payload and 55″ reach at full extension. The TMAR4-X80 reaches up to 80″ and can support a 20lb. payload.

TITANMATE® X-SERIES benefits:

Ergonomic: protects workers from injuries such as tendonitis and carpal tunnel syndrome.
Efficient: maximizes production by minimizing scrap caused by worker fatigue.
Versatile: one unit can tap, drill, fasten, lift, grind, polish, and so much more.
Mobile: can be easily moved from one work station to the next.
Economical: will pay for itself many times over its life span
Durable: designed and manufactured to the highest industrial standards.

OPTIONAL ACCESSORIES

All TitanMate models offer numerous standard accessories. Titan Tool Company also offers a wide range of optional accessories and equipment to fit most any application.

Standard Equipment:

  • Adjustable Rigid Mount or Multi-Positional Mount
  • Pnuematic cylinder, regulator, and gas spring combination
  • Steel base with three mounting holes and three leveling screws

Optional Equipment and Accessories:

  • Air Motors, Quick Change Chucks, and tapping collets
  • Heavy duty steel work carts
  • Custom Motor Mounts
  • Stud Drivers and Removers
  • Custom heavy duty pedestals
  • Mechanical clutch units

OPTIONAL PACKAGES & ACCESSORIES

POSITION SENSING

The TML3 Series and TML4 Series can be equipped with optional precision encoders for positional readout. Vertical and horizontal movement is covered by linear encoders that can be fit to most any length. A rotary encoder is used to read rotation of the arm. This system is ideal for applications where position feedback is required.

Please contact Titan Tool Company regarding further specifications, pricing, and availability of Encoder Packages.

HIGH TORQUE

Many applications have high torque requirements. The TitanMate TMAR4-56 torque arm can be modified to accommodate up to 800 ft/lbs. of torque. The lower arm is replaced with a solid aluminum arm and the upper arm is fitted with reinforcing plates. A heavy-duty base, heavy-duty bearings, and pins are added. The lift package is upgraded with larger cylinders and cylinder brackets. The bearing tubes and plates are welded together for a result that is extremely rigid and capable.

Please contact Titan Tool Company regarding further specifications, pricing, and availability of High Torque Packages.

PNEUMATIC ASSIST PACKAGES

LIFT ASSIST

The TMAR4 Articulating Arm has a gas spring and adjustable pneumatic cylinder as standard. Adding larger dual acting cylinders and custom valving allows loads up to 110 lbs. be positioned quickly and safely. The TML4 and TML3 Series Linear Arms can be equipped with controls to provide lift assist, downward pressure, and zero balance.

DRILLING ASSIST

The TMAR4 Series can be fitted with a custom package to create up to 125 lbs. downward pressure to facilitate operations such as drilling.

Please contact Titan Tool Company regarding further specifications, pricing, and availability of Pneumatic Assist Packages.

A Wide Range of Optional Accessories and Equipment

All TitanMate models offer numerous standard accessories. Titan Tool Company also offers a wide range of optional accessories and equipment to fit most any application.

Standard Equipment:

  • Adjustable Rigid Mount or Multi-Positional Mount
  • Pnuematic cylinder, regulator, and gas spring combination
  • Steel base with three mounting holes and three leveling screws

Optional Equipment and Accessories:

  • Air Motors, Quick Change Chucks, and tapping collets
  • Heavy duty steel work carts
  • Custom Motor Mounts
  • Stud Drivers and Removers
  • Custom heavy duty pedestals
  • Mechanical clutch units

TITANLITE

The TitanLite torque arm uses many of the same high quality design and parts as the TitanMate product line. The vertical column, and parallel arm assembly is made from heavy walled tubular steel. The swing arm is made of solid aluminum. A gas spring and air cylinder with regulator allows for payload adjustment and multiple configurations provide the ultimate in adjustability. All TitanLite arms are equipped with a rigid motor mount bored specifi cally for your motor for a perfect fit.

TitanLite assembly arms are perfect for:

  • Tapping
  • Screw driving
  • Deburring operations
  • Stud driving

TML4 SERIES

The TITANMATE® TML4-48 is a linear tool support arm designed to provide precise control ideally suited for high-toleranced tapping applications. The bearing housing is machined from a solid billet of aluminum to assure perfect bearing alignment for the life of the unit. To minimize friction the TML4-48 incorporates high-quality roller and recirculating ball bearings throughout its design. The twin parallel shafts are made of 1″ hardened linear shafting while the vertical shaft of the same material is a full 1.5″ (38.1mm) in diameter. This combination of rigidity and frictionless motion makes the TML4-48 the perfect choice for tapping applications requiring the maximum reliability and precision.

The TML4-48 is rigid enough to handle a 50 Lb. (23 Kg.) payload and absorb up to 100 ft.-lbs. (136 Nm) of torque reaction, yet is sensitive enough to be used with fragile, small diameter taps.

The TML4-48 uses a pneumatic balance system that allows the unit to be adjusted for any payload and moved effortlessly throughout the work envelope.

  • Ergonomic: protects workers from injuries such as tendonitis and carpal tunnel syndrome.
  • Efficient: maximizes production by minimizing scrap caused by worker fatigue.
  • Versatile: one unit can tap, drill, fasten, lift, grind, polish, and so much more.
  • Mobile: can be easily moved from one work station to the next.
  • Economical: will pay for itself many times over its life span
  • Durable: designed and manufactured to the highest industrial standards.

Standard features include:

  • Choice of Multi position or rigid tool holder
  • Adjustable pneumatic lift package
  • Hardened and ground steel shafts
  • Precision bearings
  • Base mount with leveling screws
  • Solid aluminum bearing block

Optional features include:

  • Custom motor mounts
  • Power tools
  • Quick release chucks and collets
  • Tap holders
  • Keyless chucks
  • Stud drivers
  • Work carts
  • Floor pedestals
  • Customized Pneumatic Controls (Call Titan for Details)

TML3 SERIES

The TITANMATE® TML3-42 is a linear tool support arm designed to provide precise control ideally suited for high-toleranced tapping applications. The bearing housing is machined from a solid billet of aluminum to assure perfect bearing alignment for the life of the unit. To minimize friction the TML3-42 incorporates high-quality roller and recirculating ball bearings throughout its design. The vertical and twin parallel shafts are made of hardened linear shafting. This combination of rigidity and frictionless motion makes the TML3-42 the perfect choice for tapping applications requiring the maximum reliability and precision.

The TML3-42 can handle a 35 Lb. (15.75 Kg.) payload and absorb up to 75 ft.-lbs. (101 Nm) of torque reaction.

  • Ergonomic: protects workers from injuries such as tendonitis and carpal tunnel syndrome.
  • Efficient: maximizes production by minimizing scrap caused by worker fatigue.
  • Versatile: one unit can tap, drill, fasten, lift, grind, polish, and so much more.
  • Mobile: can be easily moved from one work station to the next.
  • Economical: will pay for itself many times over its life span
  • Durable: designed and manufactured to the highest industrial standards.

Standard features include:

  • Multi position or rigid tool holder
  • Adjustable pneumatic lift package
  • Hardened and ground steel shafts
  • Precision bearings
  • Base mount with leveling screws
  • Solid aluminum bearing block

Optional features include:

  • Custom motor mounts
  • Power tools
  • Quick release chucks and collets
  • Tap holders
  • Keyless chucks
  • Stud drivers
  • Work carts
  • Floor pedestals
  • Customized Pneumatic Controls (Call Titan for Details)

TML2 SERIES

The TITANMATE® TML2-26 is a linear tool support arm designed to provide precise control ideally suited for high-toleranced tapping applications. The bearing housing is machined from a solid billet of aluminum to assure perfect bearing alignment for the life of the unit. To minimize friction the TML2-26 incorporates high-quality roller and recirculating ball bearings throughout its design. The twin parallel shafts are made of hardened linear shafting while the vertical shaft of the same material is a full 0.75″ in diameter. This combination of rigidity and frictionless motion makes the TML2-26 the perfect choice for tapping applications requiring the maximum reliability and precision.

The TML2-26 is rigid enough to handle a 5 lb. (2.26 Kg) payload and absorb up to 20 ft.-lbs. (27 Nm) of torque reaction, perfect for use with fragile, small diameter taps.

The TML2-26 uses a pneumatic balance system that allows the unit to be adjusted for any payload and moved effortlessly throughout the work envelope.


  • Precision:
    no other arm moves as freely and easily.
  • Efficient: requires almost no effort to operate.
  • Versatile: one unit can tap, drill, fasten, lift, grind, polish, and so much more.
  • Mobile: can be easily moved from one work station to the next.
  • Ergonomic: helps prevent work injuries and worker fatigue.
  • Economical: will pay for itself many times over its life span
  • Durable: designed and manufactured to the highest industrial standards.

Standard features include:

  • Choice of Multi position or rigid tool holder
  • Adjustable pneumatic lift package
  • Hardened and ground steel shafts
  • Precision bearings
  • Base mount with leveling screws
  • Solid aluminum bearing block

Optional features include:

  • Custom motor mounts
  • Power tools
  • Quick release chucks and collets
  • Tap holders
  • Keyless chucks
  • Stud drivers
  • Work carts
  • Floor pedestals

TMAR4 SERIES

The TITANMATE® TMAR4-56 is a rugged articulating tool support arm ergonomically designed to provide fingertip control for the most demanding applications. The sturdy tubular steel swing arm is connected to the base by means of a 1.5" (38.1mm) hardened and ground shaft. Both the main shaft and the center shaft utilize high-quality roller bearings to minimize friction while maximizing precision and reliability. The twin parallel arms are made of heavy gage aluminum tubing which which effectively neutralizes vibration and torque reaction. The hybrid lift system combines the best attributes of a sealed high-pressure gas spring with the flexibility of an adjustable pneumatic cylinder.

The standard TMAR4-56 is capable of balancing a 20 lb. (9.1Kg) power tool and absorbing 100 ft.-lbs. (136 Nm.) of torque reaction, yet is so sensitive that it can be used with the most delicate taps and bits.

The TMAR4-56 can be mounted on a work bench or portable cart or can be inverted for overhead mounting and is the perfect complement to any machining center or work station.

  • Ergonomic: protects workers from injuries such as tendonitis and carpal tunnel syndrome.
  • Efficient: maximizes production by minimizing scrap caused by worker fatigue.
  • Versatile: one unit can tap, drill, fasten, lift, grind, polish, and so much more.
  • Mobile: can be easily moved from one work station to the next.
  • Economical: will pay for itself many times over its life span
  • Durable: designed and manufactured to the highest industrial standards.

Standard features include:

  • Multi position tool holder
  • Adjustable air/gas lift assist package
  • Hardened and ground steel shafts
  • Precision bearings
  • Base mount with leveling screws
  • Welded steel swing arm

Optional features include:

  • Custom motor mounts
  • Power tools
  • Quick release chucks and collets
  • Tap holders
  • Keyless chucks
  • Stud drivers
  • Work carts
  • Floor pedestals
  • Rigid tool holders

TMAR2 SERIES

The TITANMATE® TMAR2-40 is a rugged articulating tool support arm ergonomically designed to provide fingertip control for the most demanding applications. The sturdy tubular steel swing arm is connected to the base by means of a 1" (25.4mm) hardened and ground shaft. Both the main shaft and the center shaft utilize high-quality roller bearings to minimize friction while maximizing precision and reliability. The twin parallel arms are made of heavy gage aluminum tubing that effectively neutralizes vibration and torque reaction. The hybrid lift system combines the best attributes of a sealed high-pressure gas spring with the flexibility of an adjustable pneumatic cylinder.

The standard TMAR2-40 is capable of balancing a 10 Lb. (4.5 Kg.) power tool and absorbing 35 Ft.-Lbs. (47.5 Nm.) of torque reaction, yet is so sensitive that it can be used with the most delicate taps and bits.

The TMAR2-40 can be mounted on a work bench or portable cart or can be inverted for overhead mounting and is the perfect complement to any machining center or work station.

  • Ergonomic: protects workers from injuries such as tendonitis and carpal tunnel syndrome.
  • Efficient: maximizes production by minimizing scrap caused by worker fatigue.
  • Versatile: one unit can tap, drill, fasten, lift, grind, polish, and so much more.
  • Mobile: can be easily moved from one work station to the next.
  • Economical: will pay for itself many times over its life span.
  • Durable: designed and manufactured to the highest industrial standards.

Standard features include:

  • Multi position or rigid tool holder
  • Adjustable air/gas lift assist package
  • Hardened and ground steel shafts
  • Precision bearings
  • Base mount with leveling screws
  • Welded steel swing arm

Optional features include:

  • Custom motor mounts
  • Power tools
  • Quick release chucks and collets
  • Tap holders
  • Keyless chucks
  • Stud drivers
  • Work carts
  • Floor pedestals